How to Install Gutters Without Fascia (Roof Straps and Rafter Tails)

Older bungalows, cabins and Craftsman-style houses often have exposed rafter tails instead of a fascia board: the rafter ends stick out past the wall, sometimes beautifully shaped, with nothing flat running along them to screw a gutter bracket into. Most standard gutter hangers assume a fascia, so these houses need a different approach.

Without a fascia, gutters are hung with roof straps, metal hangers nailed to the roof sheathing (or on top of exposed rafters) that reach out and cradle the gutter. Fine Homebuilding calls roof straps “the only option when there’s no fascia” (Fine Homebuilding). Where rafter ends are sound and evenly spaced, hangers can also be fastened into the rafter ends. Either way, space hangers no more than about 32 inches apart, and closer under heavy snow and ice (Fine Homebuilding).

Option 1: Roof straps

Roof straps are long flat hangers. One end is fastened to the roof; the other wraps around and supports the gutter.

  • When re-roofing: nail the straps to the roof sheathing and shingle over them (Fine Homebuilding). This is the cleanest time to do it.
  • On exposed rafter tails: nail the straps on top of the rafters and install flashing over the straps so water doesn’t sit on the wood and start rot (Fine Homebuilding).
  • On an existing roof: the straps have to go under the first course of shingles. That means working shingles loose without cracking them and resealing them afterward, which is a job for a roofer or an experienced gutter installer. Ask how they’ll do it and whether it affects your shingle warranty.

Option 2: Fastening into rafter ends

Spike-and-ferrule hangers (a long spike through a sleeve in the gutter) can be nailed into rafter ends rather than through a fascia (Fine Homebuilding). It’s simple, but critics note the 7-inch spikes leave large holes and encourage rot (Fine Homebuilding), and the hanger spacing is fixed by the rafter spacing.

Whatever you fasten into, the wood has to be sound. Inspect rafter ends for rot and repair them first, the same advice installers give about fascia: replace damaged sections before reattaching gutters (This Old House).

Getting the details right

  • Slope: the same ¼ inch per 10 feet toward the downspout as any gutter (Family Handyman; This Old House).
  • Spacing: no more than about 32 inches; closer for snow (Fine Homebuilding).
  • No gap at the roof edge: with no fascia, there’s often no drip edge either. Make sure water from the roof lands in the gutter, not between roof and gutter. See drip edge.
  • Downspouts: with no fascia, downspout brackets go on the wall or corner boards.

DIY or pro?

Strap installation on an existing shingle roof is one of the harder gutter jobs, because it involves the roof covering itself. It’s reasonable DIY when you’re re-roofing anyway or working on a single-story outbuilding; otherwise, get quotes from gutter installers who do strap installs regularly.

Compare installed prices near you

Free quotes from up to 3 local gutter guard installers. No obligation.

Sources

  1. Fine Homebuilding, “Gutter Hangers” (project guide). finehomebuilding.com
  2. This Old House, “How To Fix Sagging Gutters” (May 2026). thisoldhouse.com
  3. This Old House, “How To Install Aluminum Gutters” (May 2026). thisoldhouse.com
  4. Family Handyman, “How to Install Gutters” (October 2024). familyhandyman.com

Gutter reminders, right before the season

When to clean, what to check before the leaves fall and the storms come, and our new guides. Free, no spam, unsubscribe anytime.

See our privacy policy.

Get free quotes